Advanced Electronic Control System 1600/1+3 Planetary Laying Up Machine For Power Cable

• Input wire max diameter:Ø6-30 mm
• Stranding cage rotation speed:40r/min
• Max lay-up diameter:Ø100mm
• Lay-up pitch:90-1270mm (Stepless adjustable)
• Non-metallic Taping head rotation speed:600r/min
• Non-metallic pitch:12-200mm (Steplss adjustable)
• Non-metallic Taping head motor power:11KW (AC)
• Taping head pitch:12-200mm Stepless adjustable
• Max linear speed:50.8m/min
• Max traction pulling force:1600kg
• Pneumatic caterpillar motor power: 30kw (AC)
• Central pay-off bobbin size: PN1400mm
• Pay-off bobbin in cage: PN1400
• Take-up bobbin size: PN1250—PN2500
• Main stranding cage: motor power 45KW(AC)

• Ø1600 Center pay-off rack
• Ø1600/3 bobbin stranding cage
• Double row closing wire die holder
• Ø600/2 Non-metallic taping head
• 1600kg Pneumatic caterpillar
• Mechanical&Electronic Meter counter
• Ø2500 Portal type take-up with traverse wire rack
• Electronic control system
• Safety protection device

4. Electrical Control

• The unit adopts PLC for unified coordinated control and operation. Using a touch screen human-machine interface for operation. The electronic control system of the entire machine is advanced,
• The electrical cabinet is designed with good mechanical and dustproof performance, and is equipped with an appropriate amount of ventilation openings. The electrical power cabinet and control cabinet are set up and installed separately.
• The power supply is a three wire five phase system: 380V (± 10%) 50HZ.
• Total installed power: 110KW
• The unit is equipped with corresponding numbers at each operating position for easy operation.
• The electrical control part is composed of an operation cabinet, touch screen, etc., and each unit is equipped with corresponding emergency stop, jog, and easy to operate control buttons.
• Motor protection function: The electrical control circuit design includes phase loss, overload, and overheating protection functions to prevent motor damage.
• All drive motors are designed with encoders, and the encoder feedback operates in a closed-loop control system.
• Alarm fault information can be queried on the touch screen or Ethernet online, with alarm fault storage function. Historical operation information can be set to require personnel with management permissions to delete.

5. Safety protection devices

• Main cage: Single side wall safety net
• Taping machine: Fully enclosed box sliding door safety cover
• Caterpillar : Integrated sheet metal safety cover

6.Color:

• Rotating parts: RAL2009 outside orange
• Main body of the equipment: RAL5015
• Bottom frame parts: RAL9017 black